BoardMatrix

Install the firmware

With this web installer you put the BoardMatrix firmware onto your Adafruit MatrixPortal S3 straight from your browser. No software or development environment needed.

Preparation

Once per board, takes about two minutes.

  1. Browser

    Open this page in Chrome or Edge on a computer.

  2. Cable

    Connect the MatrixPortal to the computer via USB-C. Use a cable that carries data, charge-only cables will not work.

  3. Install

    Choose main unit or extra unit below, click "Install" and select the board's port in the dialog. Leave "Erase device" ticked for the first installation.

Board not found? Hold the BOOT button on the MatrixPortal, briefly press RESET, then release BOOT. Click "Install" again. After the installation press RESET once so the firmware starts.

Which board is it?

Every setup has exactly one main unit. All further boards become extra units and receive their content wirelessly from the main unit.

Main unit

Provides the Wi-Fi for the app, shows the pairing code and controls all extra units. For a single board, always choose the main unit.

Your browser does not support Web Serial. Please use Chrome or Edge on a computer. The installer only works over a secure connection (https).

 

Extra unit

For every further board in your setup. It reports to the main unit, and you then assign its zone in the app.

Your browser does not support Web Serial. Please use Chrome or Edge on a computer. The installer only works over a secure connection (https).

 

After the installation

Connect panels and power supply, switch the board on.

  1. Read the code

    The main unit shows an 8-digit code, for example 4829 1375.

  2. Open the app

    Open BoardMatrix on your iPhone, tap "Add device" and enter the code. The app joins the display's Wi-Fi on its own.

  3. Assign extra units

    Switch on the extra units near the main unit. They appear in the app as new devices, where you assign their zones.

Did something go wrong? Write to us. Privacy: the firmware is transferred only within your browser, no data is sent to us. More in the privacy policy.