Clear form. Honest material.

The flower column is made of vertical acrylic ribs and several horizontal rings that slot into each other. The result is a light, see-through frame that holds the flowers later on.

The individual parts are flat and can be stacked for transport.

It all started with the client's visualisations: a shiny trailer that opens at the side, with steps, a bright sales area and Hyalu B5 graphics, set in the middle of a city square. Our job was to turn that image into a real, robust trailer.

• Taken from the design: large side flap, fold-out steps, white shelving wall with blue-backed compartments, a screen in the centre and a free-standing counter
• During the build: interior fit-out with shelving, counter and lighting, fitted precisely into the rounded aluminium shell
• Result: the finished trailer matches the design down to the last detail, from the shelf layout to the graphics on the flap and counter

The gallery shows the finished trailer first, followed by the visualisations from the client's design and finally the interior fit-out during construction.

Our part in this project was the planning: a round DJ booth lit from within, standing on a circular stage area.

• Shape: curved, closed counter with a recess for the equipment
• Lighting: glowing front in changing colours
• Visualisation: renderings show the stage within the festival site in advance

The sculpture shows a crescent moon in profile, raising a long spoon to its mouth. The surface has a metallic finish covered in fine, scratched lines and symbols.

• Lighting: red backlighting that traces the outline of the moon on the wall
• Design: one picture shows the updated design with the light fitting above it

The Tesla Späti is made of several counter modules that together form a long, angled sales counter. The pictures show the modules during the build in the workshop hall.

• Counter: anthracite carcasses with open compartments at the back and a sheet metal worktop
• Extra units: a base cabinet with two round openings and an open shelf unit with a cut-out in the top

This DJ table is also a sculpture: a seemingly floating glass top rests on two rock-like bases. We designed and refined it in Fusion 360, from the first concept through acrylic and glass-acrylic hybrid versions to the final all-glass build.

• Top: individual 10 mm toughened glass panes bonded into a complex object. Because toughened glass cannot be worked after tempering, the shape is made entirely from precisely planned individual panes. Cut-outs and cable routing are built into the structure.
• Rock bases: a core of wood and XPS foam, shaped and coated with GRP. They look like solid stone but stay light and portable.
• Set-up: designed for 4 players and a mixer, with monitor speakers on integrated stands

The glass top, rock bases and complete DJ set-up are in place, and the table is fully installed.

Client @x.nikolinaInstagram post

For Earth Day 2026, the overall concept for the Tesla event came from us, built around renewable energy you can experience first-hand.

• Electricity-generating spinning bikes: guests pedal and produce the power used on site themselves
• Photo booth: a photo booth is a self-service camera station for events: guests take their own pictures on a touchscreen and get them printed on the spot or sent to their phone via QR code.

We have built made-to-measure beds of a similar design. The frame is wood; the coloured feet are 3D printed.

• CAD design in Fusion 360 (STEP files, 3MF for printing)
• 3D-printed feet in colour, to suit the room
• Photorealistic renderings to agree on the design in advance

We recreated the Berghain facade as a 3D wall relief, around 70 cm wide.

• Multi-part 3D print from our own CAD design (STEP and 3MF), dismantles for transport
• Available with integrated backlighting (€359) or without (€299)
• Made to order

Etsy

The Alu Shelf P3 is a minimalist wall shelf that we make from high-quality aluminium composite panel with a brushed finish.

• Very slim design with high stability
• Dimensions: 600 × 800 × 280 mm
• Easy-care, durable surface
• Modern, industrial look
• Suits living rooms, offices and kitchens

Price: €199 plus shipping.

The logo consists of several large geometric parts that we milled from wood panels. Grooves are milled into the contours to hold the pink LED lighting.

Laid out on the base panel, the gaps between the parts glow pink and trace the shape of the logo.

We built our own CNC plasma cutting machine for working with steel and sheet metal.

• Entirely self-built, including mechanics, controls and plasma torch integration
• DXF workflow for turning vector drawings into parts quickly
• Complete engineering documentation with workshop drawings

Plainposi is a precise linear positioning system on a Bosch aluminium profile, which we built for workshop and production automation.

• Stepper motor with incremental encoder for position feedback
• Arduino Uno as the controller, with buttons for teaching positions
• Nextion touch display as the user interface
• Built on Bosch profile, modular and expandable

For a private client, we made a one-off Eiffel Tower sculpture. It is built entirely from laser-cut acrylic sheets, which we bonded into a precise structure.

• CAD design in Fusion 360
• Bonded laser-cut acrylic sheets
• Complete workshop drawing as assembly instructions

We designed a motorised mirror ball in the shape of a star, a kinetic light sculpture with 32 independently rotating points.

• 32 motors: each point rotates on its own, at different speeds and in different choreographies
• Mirrored star faces scatter fragmented reflections across the whole room
• Geometry based on a polyhedron of pentagons and hexagons, like a classic football
• 3D-printed frame, modular for transport
• CAD design in Fusion 360 over several iterations

The sculpture has been built. The images still show renderings; photos will follow.

We designed and built a belt sander for our workshop entirely ourselves.

• CAD in Fusion 360, over several iterations up to version 6
• Mix of 3D-printed and CNC-milled parts
• Complete workshop drawings as PDF
• Working prototype, detail photos of the components

The mini camper is a self-build in the classic teardrop shape. The pictures show the journey from bare shell to closed body:

• Structure: side walls made of wood panels with window cut-outs, mounted on a floor panel
• Interior: storage compartments and hatches at the rear, built directly into the walls
• Body: roof and front made of curved panels, with a rear hatch that opens upwards
• Chassis: the body sits on a trailer chassis with a drawbar

We planned and built the mobile parade truck entirely ourselves. The float holds up to 150 people and can be used flexibly for a wide range of events.

• A regular at Rave The Planet in Berlin
• Used at CSD and other parades
• Extensive equipment and a professional sound system
• Available for parades, festivals, corporate events and private parties

We built the website for booking requests with WordPress and WooCommerce.

Betty 26 (01/2026): with “Betty” we developed a new truck build for the Berlin events market, fully engineered in Fusion 360. Clients include Ritter Butzke Production, Alte Försterei and Guerilla Production Berlin.

paradefloat.de

We use our self-built CNC gantry router to produce furniture, speaker cabinets and signage efficiently and precisely.

• Machining of wood and plastics up to 3.6 m in length
• Wood species: oak, cherry, bamboo, walnut
• Custom CNC routers: work area up to 2,200 × 5,000 mm
• Clearance height up to 300 mm
• Automatic tool changer
• Vacuum pads for holding workpieces

We handcraft one-off pieces from solid wood and high-quality epoxy resin. Every piece is unique.

• “bloody nut”: desk made of walnut with bright red epoxy resin. Strong contrast, sturdy and durable. (€1,800)
• “distorted green”: table made of solid oak with green-tinted resin and integrated LED lighting. (€1,100)

We seal every piece carefully by hand and make it to measure.

We build custom DJ consoles and fit-outs. Every piece is made individually to our clients' requirements.

• Furniture design and integrated equipment in one piece
• Made to fit the space it is used in
• Materials to suit, from solid wood with coloured epoxy resin to glass and steel

The kiosks stand freely in the mall and can be accessed from several sides. They come in two versions: with light white and beige fronts, and with carcasses in a wood finish.

• Counter: wrap-around worktop with space for the till and screens
• Display cases: glass tops and glass cabinets with interior lighting
• Product displays: illuminated inserts and light boxes for products and logos

The fit-out uses a wood finish throughout. The pictures show the process from installation on the bare site to the fully stocked shop.

• Illuminated display cases: wall-mounted units of varying heights with backlit shelves
• Counter: long central counter with a light worktop
• Glass showcases: free-standing glass cases on wooden bases with interior lighting
• Ceiling: suspended elements in a wood finish with built-in spotlights

For an interior fit-out we created a truss with a steel girder look. The girders and gusset plates are made of MDF, and the rivets are wooden half-spheres glued on top. A rust-effect finish turns them into what looks like old metal.

• Girder elements: profiles with gusset plates and rivets, grey with a rust effect
• Truss: frames with diagonal braces forming a large partition, installed on site
• Setting: a backlit logo on the wall behind it

We build loudspeakers by hand. It is a long-running project that has produced many models with different concepts over the years.

• Cabinets made of wood and wood-based panels, some painted, individually tuned to the drivers
• Different designs: horn, bass reflex, sealed
• Several models, from floor-standing speakers to compact bookshelf monitors